Hi,

Sometimes when I say "Show numbers" in order to use the relevant WSR command, instead of performing the command, I simply get the word 'show numbers' appearing in text on the screen.  Other times the command seems to work fine.  I can't work our why.  Any thoughts?

 

-------------------------

Kingsley Mudd

                    Welcome (See Mission Statement)

WSR is a dying technology that we suspect will be removed from the next full Windows release because Microsoft now owns Nuance (Dragon). WSR development was discontinued in 2006; other than a minor change to support the Windows 7/8/10 desktop interface.

In DPI 15.61 (Dragon Professional Individual), you can force a command by holding the {Ctrl} Key down. You might look to see if there is a similar option in WSR. However, if speech recognition plays an important role in your computer use, you should consider Dragon and if you are disabled, the KnowBrainer 2017 (w/2020 AI Commands) hands-free command utility is free. We only mentioned disabled because we don't typically see nondisabled end-users working with numbering technology.

-------------------------

Change "No" to "Know" w/KnowBrainer 2022
Trial Downloads
Dragon/Sales@KnowBrainer.com 
(615) 884-4558 ex 1

That's helpful, thanks.
Cheers :-)

-------------------------

Kingsley Mudd

Hi Kingsley,

This I believe is what we call a 'temporary blip.' When this happens, shut down Windows Speech Recognition and then restart it. You will find that ShowNumbers will be reinstated.

Cheers

-------------------------

Tiger Feet

| DPG 15.7.1 | KnowBrainer 2020 | Windows 10 Professional /64 Bit | Intel® Core™ i9 Ten-Core Processor i9-10900K (3.7GHz) 20MB Cache |  32GB RAM. | 250GB SAMSUNG 970 EVO PLUS M.2, PCIe NVMe SSD (up to 3500MB/R, 2300MB/W) Boot Drive | 1TB SAMSUNG 970 EVO PLUS M.2, PCIe NVMe SSD (up to 3500MB/R, 3300MB/W) Storage Drive | Sennheiser D10 USB Wireless Microphone