I'm trying to open up a program called Opus that uses a layout that's called, in my case, VCarve-OneNote-WasteBoard. I have no problem using the following command that only opens Dragon.

Sub Main
AppBringUp "A:\UTY\Opus\dopus.exe"
End Sub

My Problem occurs when I try to use a Lister, which modifies how I want Opus to appear. I have been told by a developer at Opus what I need to do. My problem occurs when I try to use this code, which also opens a Lister with Opus, and save it in Dragon Manage Custom Codes. Here is the following code I was suggested use:

Sub Main
AppBringUp "C:\Program Files\GPSoftware\Directory Opus\DOpusRT.exe" /cmd Prefs LAYOUT="Carve-OneNote-WasteBoard"
End Sub

You Can see all the details of my messsge regrading oping a Lister with Opus at the followings link::

Leo Directory Opus Developer

https://resource.dopus.com/t/verbally-open-opus-a-lister-not-the-default-lister/38753

Robert Snow
Germantown, WI

Try:
AppBringUp "C:\Program Files\GPSoftware\Directory Opus\DOpusRT.exe /cmd Prefs LAYOUT=Carve-OneNote-WasteBoard"

Note that there is a between ".exe" and "/cmd".

-Edgar
DPI 15.3, 64-bit Windows 10 Pro, OpenOffice & Office 365, Norton Security, Shure X2U XLR to USB mic adapter with Audio Technica DB135 vocal mic, Asus X299-Deluxe Prime, Intel Core i9-7940X (14 core, 4.3 GHz overclocked to 4.9 GHz), G.SKILL TridentZ Series 64GB (4 x 16GB) DDR4 3333 (PC4 26600) F4-3333C16Q-64GTZ, NVIDIA GIGABYTE GeForce GTX 1060 GV-N1060G1 GAMING-6GD REV 2.0 6GB graphics card with 3 1920x1080 monitors