 |
KnowBrainer Speech Recognition |
 |
 |  |
|
Topic Title: KB 2011 Global Command no longer works Topic Summary: KB user global command stopped working Created On: 04/10/2011 05:26 PM Status: Post and Reply |
|
 |
 |
- MTreloar | - 04/10/2011 05:26 PM |
|
|
- Lunis Orcutt | - 04/11/2011 11:55 AM |
 04/10/2011 05:26 PM
|
|
|
I'm a novice user and I was initially thrilled that the first global command that I wrote worked. It didn't last for long. I used KB 2011 global commands to write the following small script which calls a Macro Express routine to submit a dictation in a Remote Desktop EMR. Initially, this worked fine. However, I ran the acoustic and language optimizer, and rebooted the computer. Now the KB global command only types out my "heard words" - submit diagnosis. Any thoughts on how I can fix this? The macro works if I dictate the hotkeys using the command: Type control shift u Here is the global command HeardWord "submit"," diagnosis"
------------------------- Murray | DNS 12.5 Premium | KB 2012 | Win7x64 | i7-820QM 1.73GHz | 16 GB DDR3@665 MHz | VXI USB DAC | Boom-O wired mic
|
|
|
|
|
|
04/11/2011 11:55 AM
|
|
|
Try removing the extra space between the open quote and diagnosis. Also make certain that if you create your command and lower case, the HeardWord reference must be in lower case and vice versa.
-------------------------
|
|
|
|
|
jpg.JPG)
FuseTalk Standard Edition v4.0 - © 1999-2013 FuseTalk™ Inc. All rights reserved.